供应龙华手机充电器批发

输入特性 1.1 VOLTAGE 电压 The Normal input voltage is from 100 to 240VAC 额定输入电压：100V~240VAC。 The range of input voltage is from 90 to 264VAC . 输入电压范围：90V~264VAC。   1.2 FREQUENCY 频率 The Normal of input frequency is from 50Hz to 60Hz . 额定频率：50Hz ~ 60Hz。 The range of input frequency is from 47Hz to 63Hz . 输入频率范围：47Hz ~ 63Hz。   1.3 CURRENT 电流 The maximum input current is 0.5A at 100Vac at max load300mA . 在AC100V输入*负载500mA时，*输入电流：0.3A。 1.4 INRUSH CURRENT 浪涌电流 The inrush current will not exceed30A at 220Vac input, cold start, 25℃. 在电压220V时，冷起动，25℃，浪涌电流不超过30A。 输出特性   2.1 Static load: 静态负载   Output# 输出# Voltage 电压 Minimum load 最小负载 Maximum load 额定负载 Peak load 恒流范围 1 +5V 0 mA 500mA     2.2 Output voltage:    输出电压 The output voltage shall be statically regulated for all combinations of load, line and environment including cross regulation as shown. 输出电压应为所有静态调节组合负载，线路和环境，如下所示。 Output# 输出# Voltage/Current 电压/电流 Range 范围 Tolerance 公差 1 5V/0A 4.5V~5.6V +0.5/-0.6V   5V/500mA 4.5V~5.6V +0.5/-0.6V   2.3 Ripple and Noise    纹波加噪声   Output# 输出# Voltage 电压 Maximum ripple & Noise *纹波加噪声 1 +5V 250MVp-p (Ripple) 保护条件   4.1 Over-current protection: 过流保护： When operating any output under any line condition, into an over load condition for an indefinite period of time, The AC Adapter shall be self – recovering when fault condition remove. 作业时，任何条件下任何输出，无限期的超过负荷，故障排除后电源能自我恢复。   4.2 Short circuit protection: 短路保护 When operating any output under any line condition, into a short circuit condition for an indefinite period of time, The AC Adapter shall be self –recovering when fault condition remove. 作业时，任何条件下任何输出，无限期的短路，故障排除后电源能自我恢复。   标签：     深圳市手机充电器   深圳市手机充电器厂家
广东 深圳市深圳市手机充电器厂家
供应龙华手机充电器批发