西门子6SL3210-1SE23-8AA0

Overview PM340 Power Modules in blocksize format, frame sizes FSA to FSF The PM340 Power Modules in blocksize format feature the following connections and interfaces as standard: Line supply connection PMIF interface for connection of the PM340 and CU305 Co*ol Unit. The PM340 Power Module also supplies power to the CU305 Co*ol Unit by means of an integrated power supply. Terminals DCP/R1 and R2 for connection of an external braking resistor Motor connection made with screw terminals or screw studs Co*ol circuit for the Safe Brake Relay for co*olling a holding brake 2 PE/protective conductor connections PM340 Power Modules without integrated line filter can be connected to grounded TN/TT and non-grounded IT systems. PM340 Power Modules with integrated line filter are suitable only for connection to TN systems with grounded star point. The integrated braking unit (braking chopper) is rated with the capability to continuously utilize the external braking resistor. The temperature of the external braking resistor must be monitored to provide protection against thermal overlo*g. Integration PM340 Power Modules communicate with the CU305 Co*ol Unit via the PM-IF interface. PM340 Power Module with CU305 DP Co*ol Unit and BOP20 Basic Operator Panel Note: Operation of SINAMICS S110 in conjunction with PM2402 Power Modules is *sible with firmware version V4.4 SP3 and higher. Connection example: PM340 Power Module Many system components are designed as base components for PM340 Power Modules. I.e. the component is mounted on the baseplate and the PM340 Power Module in front of them in a space-s*ing construction. Up to two base components can be mounted in front of one another.   FSA FSB FSC FSD FSE FSF Line filter   – – – – – Line reactor           O Braking resistor     O O O O Motor reactor       O O O = Suitable as base type O = Not suitable as base type – = Not *ailable (use a PM340 Power Module with integrated line filter)   Basic layout of a PM340 Power Module with line reactor as base component The line side reactors are equipped with terminals on the line side and with a pre-assembled cable on the PM340 Power Module side. When installed, the mains terminals are at the top on frame sizes FSA to FSC, and at the bottom on frame sizes FSD and FSE. PM340 Power Module in frame size FSA with line reactor and line filter If a line filter is installed in addition to the line reactor on frame size FSA, the components must be arranged as shown in the diagram above. In this *e, the line supply connection is at the bottom. PM340 Power Module in frame size FSA with line reactor and motor reactor PM340 Power Modules of frame size FSB and higher are *ailable with integrated line filters, alleviating the need for an external line filter. For configurations involving more than two base-type system components, e.g. line reactor + motor reactor + braking resistor, individual components must be mounted to the side of the PM340 Power Module. In this instance, the line and motor reactors must be installed behind the PM340 Power Module and the braking resistor to the side. Technical Specifications   Air-cooled PM340 Power Module in blocksize format 6SL3210-1S... Line connection voltage (up to 2000 m/6562 ft above sea level) 200 V ... 240 V 1 AC ±10% (in operation -15% < 1 min) or 380 ... 480 V 3 AC ±10% (in operation -15% <1 min) Line   Power Modules without integrated line filter Grounded TN/TT systems and non-grounded IT systems Power Modules with integrated line filter TN systems with grounded star point Line frequency 47 ... 63 Hz Line power factor at rated power   Fundamental power factor (cos φ1) >0.96 Total (λ)   200 ... 240 V 1 AC 0.45 ... 0.7 380 ... 480 V 3 AC 0.65 ... 0.95 Overvoltage category acc. to EN 60664-1 Class III Precharging frequency of the DC link, max. 1× every 30 s DC link voltage, approx. 1.35 × line voltage Output frequency   Co*ol type Servo 0 ... 330 Hz 1) Electronics power supply 24 V DC -15 %/+20 % Radio interference suppression   Standard No radio interference suppression With line filter Category C2 acc. to EN 618003 Type of cooling Forced air cooling by means of built-in fan A ambient or coolant temperature (air) in operation for line-side components, Power Modules 0 ... 40 °C (32 ... 104 °F) without derating, >40 ... 55 °C (>104 ... 131 °F) see characteristics Installation altitude Up to 1000 m (3281 ft) above sea level without derating, >1000 ... 4000 m (3281 ... 13124 ft) above sea levelsee derating characteristics Conformity CE (low-voltage and EMC Directives) Approvals, according to cULus Safety Integrated Safety Integrity Level 2 (SIL 2) according to IEC 61508,  Performance Level d (PL d) and Category 3 according to EN ISO 138491 Additional information is provided in chapter Highlights, section Safety Integrated. 1) Note the correlation between max. output frequency, pulse frequency and current derating.   Line voltage 200 ... 240 V 1 AC Air-cooled PM340 Power Module in blocksize format     6SL3210-1SB11-0... 6SL3210-1SB12-3... 6SL3210-1SB14-0... Output current         Rated current Irated A 0.9 2.3 3.9 Base-load current IH A 0.8 2 3.4 For S6 duty (40 %) IS6 A 1.4 3.3 5.5 Maximum currentImax A 2 4.6 7.8 Type rating 1) Based on Irated kW (hp) 0.12 (0.16) 0.37 (0.5) 0.75 (1) Rated pulse frequency kHz 4 4 4 Power loss kW 0.06 0.075 0.11 Cooling air requirement m3/s (ft3/s) 0.005 (0.2) 0.005 (0.2) 0.005 (0.2) Sound pressure level LpA (1 m) dB <45 <45 <45 24 V DC power supply for the Co*ol Unit A 1 1 1 Rated input current2) with/without line reactor A 1.4/2.2 4/6 6.5/10 Resistance value of the external braking resistor Ω  ≥180 ≥180 ≥180 Cable length to braking resistor, max. m (ft) 15 (49) 15 (49) 15 (49) Line supply connection L, N   Screw terminals Screw terminals Screw terminals Conductor cross-section mm2 1 ... 2.5 1 ... 2.5 1 ... 2.5 DC link connection,  connection for braking resistor DCP/R1, DCN, R2   Screw terminals Screw terminals Screw terminals Conductor cross-section mm2 1 ... 2.5 1 ... 2.5 1 ... 2.5 Motor connection U2, V2, W2   Screw terminals Screw terminals Screw terminals Conductor cross-section mm2 1 ... 2.5 1 ... 2.5 1 ... 2.5 PE connection   M4 screw M4 screw M4 screw Motor cable length3), max. (without external options)         Shielded m (ft) 50 (164) 50 (164) 50 (164) Unshielded m (ft) 75 (246) 75 (246) 75 (246) Degree of protection   IP20 IP20 IP20 Dimensions         Width mm (in) 73 (2.87) 73 (2.87) 73 (2.87) Height mm (in) 173 (6.81) 173 (6.81) 173 (6.81) Depth         PM340 mm (in) 145 (5.71) 145 (5.71) 145 (5.71) PM340 with CU305 PN mm (in) 216 (8.50) 216 (8.50) 216 (8.50) PM340 with CU305 DP/CAN mm (in) 200 (7.87) 200 (7.87) 200 (7.87) Frame size   FSA FSA FSA Weight, approx. kg (lb) 1.2 (2.65) 1.3 (2.87) 1.3 (2.87) 1) Rated power of a typical standard asynchronous (induction) motor at 230 V 3 AC. 2) The input current depends on the motor load and line impedance. The input currents apply for rated power lo*g (based on Irated) for a line impedance corresponding to uk = 1 %. 3) Max. motor cable length 15 m (shielded) for PM340 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.   Line voltage 380 ... 480 V 3 AC Air-cooled PM340 Power Module in blocksize format     6SL3210-1SE11-3UA0 6SL3210-1SE11-7UA0 6SL3210-1SE12-2UA0 6SL3210-1SE13-1UA0 6SL3210-1SE14-1UA0 Output current             Rated current Irated A 1.3 1.7 2.2 3.1 4.1 Base-load current IH A 1.1 1.5 1.9 2.7 3.6 For S6 duty (40 %) IS6 A 1.3 2 2.5 3.5 4.5 Maximum currentImax A 2.6 3.4 4.4 6.2 8.2 Type rating 1)             Based on Irated kW (hp) 0.37 (0.5) 0.55 (0.75) 0.75 (1) 1.1 (1.5) 1.5 (2) Based on IH kW (hp) 0.37 (0.5) 0.55 (0.75) 0.75 (1) 1.1 (1.5) 1.5 (2) Rated pulse frequency kHz 4 4 4 4 4 Power loss kW 0.1 0.1 0.1 0.11 0.11 Cooling air requirement m3/s (ft3/s) 0.005 (0.2) 0.005 (0.2) 0.005 (0.2) 0.005 (0.2) 0.005 (0.2) Sound pressure level LpA (1 m) dB <45 <45 <45 <45 <45 24 V DC power supply for the Co*ol Unit A 1 1 1 1 1 Rated input current2) with/without line reactor A 1.3/1.7 1.7/2.2 2.2/2.6 3.1/3.9 4.1/4.8 Resistance value of the external braking resistor Ω  ≥390 ≥390 ≥390 ≥390 ≥390 Cable length to braking resistor, max. m (ft) 15 (49) 15 (49) 15 (49) 15 (49) 15 (49) Line supply connection U1/L1, V1/L2, W1/L3   Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Conductor cross-section mm2 1 ... 2.5 1 ... 2.5 1 ... 2.5 1 ... 2.5 1 ... 2.5 DC link connection,  connection for braking resistor DCP/R1, DCN, R2   Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Conductor cross-section mm2 1 ... 2.5 1 ... 2.5 1 ... 2.5 1 ... 2.5 1 ... 2.5 Motor connection U2, V2, W2   Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Conductor cross-section mm2 1 ... 2.5 1 ... 2.5 1 ... 2.5 1 ... 2.5 1 ... 2.5 PE connection   M4 screw M4 screw M4 screw M4 screw M4 screw Motor cable length3), max.             Shielded m (ft) 50 (164) 50 (164) 50 (164) 50 (164) 50 (164) Unshielded m (ft) 75 (246) 75 (246) 75 (246) 75 (246) 75 (246) Degree of protection   IP20 IP20 IP20 IP20 IP20 Dimensions             Width mm (in) 73 (2.87) 73 (2.87) 73 (2.87) 73 (2.87) 73 (2.87) Height mm (in) 173 (6.81) 173 (6.81) 173 (6.81) 173 (6.81) 173 (6.81) Depth             PM340 mm (in) 145 (5.71) 145 (5.71) 145 (5.71) 145 (5.71) 145 (5.71) PM340 with CU305 PN mm (in) 216 (8.50) 216 (8.50) 216 (8.50) 216 (8.50) 216 (8.50) PM340 with CU305 DP/CAN mm (in) 200 (7.87) 200 (7.87) 200 (7.87) 200 (7.87) 200 (7.87) Frame size   FSA FSA FSA FSA FSA Weight, approx. kg (lb) 1.2 (2.65) 1.2 (2.65) 1.2 (2.65) 1.2 (2.65) 1.2 (2.65) 1) Rated power of a typical standard asynchronous (induction) motor at 400 V 3 AC. 2) The input current depends on the motor load and line impedance. The input currents apply for rated power lo*g (based on Irated) for a line impedance corresponding to uk = 1 %. 3) Max. motor cable length 25 m (shielded) for PM340 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.   Line voltage 380 ... 480 V 3 AC Air-cooled PM340 Power Module in blocksize format     6SL3210-1SE16-0... 6SL3210-1SE17-7... 6SL3210-1SE21-0... 6SL3210-1SE21-8... 6SL3210-1SE22-5... 6SL3210-1SE23-2... Output current               Rated current Irated A 5.9 7.7 10.2 18 25 32 Base-load current IH A 5.2 6.8 9.1 14 21 27 For S6 duty (40 %) IS6 A 6.4 8.3 10.8 19.6 27.8 37.1 Maximum currentImax A 11.8 15.4 20.4 26.4 38 52 Type rating 1)               Based on Irated kW (hp) 2.2 (3) 3 (5) 4 (5) 7.5 (10) 11 (15) 15 (20) Based on IH kW (hp) 2.2 (3) 3 (5) 4 (5) 5.5 (10) 7.5 (10) 11 (15) Rated pulse frequency kHz 4 4 4 4 4 4 Power loss kW 0.14 0.16 0.18 0.24 0.3 0.4 Cooling air requirement m3/s (ft3/s) 0.009 (0.3) 0.009 (0.3) 0.009 (0.3) 0.038 (1.3) 0.038 (1.3) 0.038 (1.3) Sound pressure level LpA (1 m) dB <50 <50 <50 <60 <60 <60 24 V DC power supply for the Co*ol Unit A 1 1 1 1 1 1 Rated input current2) with/without line reactor A 5.6/6.7 7.5/8.9 9.8/12.4 17.1/23.1 24.6/32.6 33/39 Resistance value of the external braking resistor Ω  ≥160 ≥160 ≥160 ≥56 ≥56 ≥56 Cable length to braking resistor, max. m (ft) 15 (49) 15 (49) 15 (49) 15 (49) 15 (49) 15 (49) Line supply connection U1/L1, V1/L2, W1/L3   Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Conductor cross-section mm2 1 ... 6 1 ... 6 1 ... 6 2.5 ... 10 2.5 ... 10 2.5 ... 10 DC link connection,  connection for braking resistor DCP/R1, DCN, R2   Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Conductor cross-section mm2 1 ... 6 1 ... 6 1 ... 6 2.5 ... 10 2.5 ... 10 2.5 ... 10 Motor connection U2, V2, W2   Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Screw-type terminals Conductor cross-section mm2 1 ... 6 1 ... 6 1 ... 6 2.5 ... 10 2.5 ... 10 2.5 ... 10 PE connection   M5 screw M5 screw M5 screw M5 screw M5 screw M5 screw Motor cable length3), max.               Shielded m (ft) 50 (164) 50 (164) 50 (164) 50 (164) 50 (164) 50 (164) Unshielded m (ft) 75 (246) 75 (246) 75 (246) 75 (246) 75 (246) 75 (246) Degree of protection   IP20 IP20 IP20 IP20 IP20 IP20 Dimensions               Width mm (in) 153 (6.02) 153 (6.02) 153 (6.02) 188.4 (7.42) 188.4 (7.42) 188.4 (7.42) Height mm (in) 270 (10.63) 270 (10.63) 270 (10.63) 333.4 (13.13) 333.4 (13.13) 333.4 (13.13) Depth               PM340 mm (in) 165 (6.50) 165 (6.50) 165 (6.50) 185 (7.28) 185 (7.28) 185 (7.28) PM340 with CU305 PN mm (in) 236 (9.29) 236 (9.29) 236 (9.29) 256 (10.08) 256 (10.08) 256 (10.08) PM340 with CU305 DP/CAN mm (in) 220 (8.66) 220 (8.66) 220 (8.66) 240 (9.45) 240 (9.45) 240 (9.45) Frame size   FSB FSB FSB FSC FSC FSC Weight, approx. kg (lb) 4 (8.82) 4 (8.82) 4 (8.82) 6.5 (14.3) 6.5 (14.3) 6.5 (14.3) 1) Rated power of a typical standard asynchronous (induction) motor at 400 V 3 AC. 2) The input current depends on the motor load and line impedance. The input currents apply for rated power lo*g (based on Irated) for a line impedance corresponding to uk = 1 %. 3) Max. motor cable length 25 m (shielded) for PM340 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.   Line voltage 380 ... 480 V 3 AC Air-cooled PM340 Power Module in blocksize format     6SL3210-1SE23-8... 6SL3210-1SE24-5... 6SL3210-1SE26-0... 6SL3210-1SE27-5... 6SL3210-1SE31-0... Output current             Rated current Irated A 38 45 60 75 90 Base-load current IH A 33 40 48 65 80 For S6 duty (40 %) IS6 A 49 58 78 98 117 Maximum currentImax A 64 76 90 124 150 Type rating 1)             Based on Irated kW (hp) 18.5 (25) 22 (30) 30 (40) 37 (50) 45 (60) Based on IH kW (hp) 15 (20) 18.5 (25) 22 (30) 30 (40) 37 (50) Rated pulse frequency kHz 4 4 4 4 4 Power loss kW 0.38 0.51 0.69 0.99 1.21 Cooling air requirement m3/s (ft3/s) 0.022 (0.8) 0.022 (0.8) 0.039 (1.4) 0.022 (0.8) 0.039 (1.4) Sound pressure level LpA (1 m) dB <60 <60 <61 <60 <62 24 V DC power supply for the Co*ol Unit A 1 1 1 1 1 Rated input current2) with/without line reactor A 40/46 47/53 63/72 78/88 94/105 Resistance value of the external braking resistor Ω  ≥27 ≥27 ≥27 ≥15 ≥15 Cable length to braking resistor, max. m (ft) 15 (49) 15 (49) 15 (49) 15 (49) 15 (49) Line supply connection U1/L1, V1/L2, W1/L3   M6 screw stud M6 screw stud M6 screw stud M6 screw stud M6 screw stud Conductor cross-section mm2 10 ... 35 10 ... 35 10 ... 35 10 ... 35 10 ... 35 DC link connection,  connection for braking resistor DCP/R1, DCN, R2   M6 screw stud M6 screw stud M6 screw stud M6 screw stud M6 screw stud Conductor cross-section mm2 10 ... 50 10 ... 50 10 ... 50 10 ... 50 10 ... 50 Motor connection U2, V2, W2   M6 screw stud M6 screw stud M6 screw stud M6 screw stud M6 screw stud Conductor cross-section mm2 10 ... 35 10 ... 35 10 ... 35 10 ... 35 10 ... 35 PE connection   M6 screw M6 screw M6 screw M6 screw M6 screw Motor cable length3), max.             Shielded m (ft) 70 (230) 70 (230) 70 (230) 70 (230) 70 (230) Unshielded m (ft) 100 (328) 100 (328) 100 (328) 100 (328) 100 (328) Degree of protection   IP20 IP20 IP20 IP20 IP20 Dimensions             Width mm (in) 275 (10.83) 275 (10.83) 275 (10.83) 275 (10.83) 275 (10.83) Height, PM340 without/with int. filter   418.3/511 418.3/511 418.3/511 498.3/633 498.3/633 Depth             PM340 mm (in) 203.5 (8.01) 203.5 (8.01) 203.5 (8.01) 203.5 (8.01) 203.5 (8.01) PM340 with CU305 PN mm (in) 274.5 (10.81) 274.5 (10.81) 274.5 (10.81) 274.5 (10.81) 274.5 (10.81) PM340 with CU305 DP/CAN mm (in) 258.5 (10.18) 258.5 (10.18) 258.5 (10.18) 258.5 (10.18) 258.5 (10.18) Frame size   FSD FSD FSD FSE FSE Weight, approx. PM340 without/with int. filter kg (lb) 15.9/19.3 (35/43) 15.9/19.3 (35/43) 15.9/19.3 (35/43) 19.8/27.1 (44/60) 19.8/27.1 (44/60) 标签： 西门子S S120   西门子S120控制器模块 S120控制器模块   上海市6SL3210-1SE23-8A   上海市6SL3210-1SE23-8A厂家
[S120控制器模块 S120控制器模块] 上海市6SL3210-1SE23-8A厂家
西门子6SL3210-1SE23-8AA0